10-09-2010 09:01 AM
I want to schedule a weekly scan of only my C: drive. I don't see any option on how to confugure that actual backup (quick, full, custom) when I schedule it.
How is this done?
10-09-2010 10:47 AM
By default scheduled scans are full scans. As the quick scan takes only a minute or two to run it makes no sense to schedule it. For me, and I suspect the vast majority of users, the purpose of a scheduled scan is to give the whole system a thourough going over at a time when it will not not disrupt my use of the system. I can imagine no reason to exclude the C: drive from a scheduled scan, and since 90% of the elapsed time of a full scan is used scanning that drive it adds very little time to a scan to do do the full system. I guess if one had a giant dedicated media drive attached they might wish to exclude it; but the black hats are always coming up with new stuff; so from my perspective a scheduled scan should exclude nothing (especially if the drive is Shared). I like like the peace of mind that comes with knowing that everything connected to my pc is clean after a scheduled scan. Also, since my scans are scheduled to occure in otherwise idle time why would I not want to know that my entire system is clean.
10-09-2010 12:12 PM
I want to EXCLUDE some shared drives that are cloud based.
I am billed by bandwidth to those drives and don't want TM IS to read them in total each week.
So there is no way to have TM IS Titanium do a Custom Scan each week ?
10-14-2010 07:10 AM
Trend Micro's full scan don't include mapped network drives and I believe Virtual drives for your storage in the cloud is considered as a Network Drive so this is not scanned by Trend Micro. Usually items on your online storage is cached on your computer represented by a drive under My Computer.
Titanium, since you can't specify what drives are scanned during a Scheduled Scan, does it by sequence of 3 Quick Scans and 1 Full Scan 3:1 then resets the counter to 0 again.
Hope this has been informative to you.
11-21-2010 10:26 PM
My scheduled scans are only taking a minute or so to complete. If I run a manual quick scan it also only takes about a minute. When it's in progress it looks like it's not scanning contents of My Documents. If I run a manual full scan it takes well over an hour.
That makes me question the comment "By default scheduled scans are full scans." Or am I missing something? I'm running Trend Micro Titanium IS version 3.0.1303. (If it's relevant the used space on my Drive C is 67GB out of a total 453GB available)
11-22-2010 07:29 AM
irongate- I am sorry for my original comment. You are correct. The scheduled scan feature defaults to 3 quick scans followed by one full scan, then 3 quick, then 1 full, etc. This would result in one full scan every 4 days if the feature is set to daily or 1 full scan every month if set to a specific day. While this scheme seems reasonable to me, I understand from another thread in this forum that Trends' engineers are working adding some more user control back into this feature.
11-22-2010 01:08 PM
Thankyou dmccann. Correct information of this type should be in the "Product Manual" but it's not. The Manual currently omits a lot of content that the average non tech user such as I am would find very useful and save time wading through forums. Many of Trend's competitors are a bit more helpful, thorough and professional in this way.
12-04-2010 11:55 AM - edited 12-04-2010 11:57 AM
AMEN! The control of scans, their type, the logging of scans by type, etc. etc. needs some serious work. I eagerly await the improvements. I SELL this thing with no commission.
How can one find out the schedule / plan for getting this done?
09-02-2011 02:37 AM
Any updates on this? I'd really like to remove several drives and folders from the scheduled scan list, currently I use the exception list to omit what I would like but that makes for one big exception list.
It would be really nice to have control over scheduled scans as with previous versions where a different scan could be set for different times. i.e scan drives C & D Monday, E & F Tuesday, omit all removable drives etc, I'm sure this function was in previous version of Trend and having it again would be great.
09-29-2011 08:19 PM
I have Titanium installed. The scheduled scan does a "quick scan" by default. There doesn't seem to be anywhere I can set the type of scan I want run when scheduled. Reading the other postings it looks like the "full scan" is scheduled by default for them. Can someone at Trend Micro respond to this.
Also, when I manually start a "full scan", it sometimes takes a couple of hours to run and other times it takes 8 to 10 hours to run. Why is there such a variation in run times.